noutati

Telefoane :
+40 232 765590
infostar@infostar-pascani.ro

IPC2U annonces new PoE (Power over Ethernet) Controller and Switch

The new PoE Controller and Switch are from the PET-7000 Series of IPC2U. They will give your Applications more flexibility because of no need of power cable and supply.

02.02.2009

NS-205PSE unmanaged industrial PoE Switch

The NS-205PSE is a 5-port unmanaged PoE (Power-over-Ethernet) Industrial Ethernet switch, it supports 4 PoE ports which are classified as power source equipments (PSE).The NS-205PSE makes centralized power supply come true and provides up to 15.4 watts of power per port. The NS-205PSE can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring..

PoE Switch NS-205 PSE

PoE Switch NS-205 PSE

Abb.: NS-205PSE

Features of the industrial PoE Switch

Automatic MDI/MDI-X crossover for plug-and-play
Each port supports both 10/100Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow control
3.2 Gbps high performance memory bandwidth
Power Inputs +46 ~ +55V DC
Supports operating temperatures from –40 ~ +75°C
DIN rail mount
IEEE 802.3af Compliant PoE Ports
Four PoE ports with Power Sourcing Equipment (PSE) operation
Auto-detection of PD (powered devices) and automatic power management
Over-temperature, over-current and over/under-voltage detection

PoE Switch NS-205 PSE

Order Information

Please contact your IPC2U representative or sales@ipc2U.de for further information.

PET-7052

Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.

The PET-7052 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable). The PET-7052 can receive power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used in a standard Ethernet (non-PoE) system.

The PET-7052, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7052 offers easily and safely access for users from anytime and anywhere! In addition, the PET-7052 also supports Modbus/TCP protocol that makes perfect integration for PET-7052 to SCADA software.

The PET-7052 provides 8 isolated open collector (source type) output and 8 isolated wet contact (sink, source type) digital input channels. Each output channel supports 650mA current driving @10~40VDC and each digital input channel supports counter input (32 bits and 500Hz max.).

PET-7052 Controller

PET-7052 Controller

Abb.: PET 7052

PET-7052
8-channel Isolated Source Type Open Collector Output and
8-channel Isolated Digital Input Module with PoE

IEEE 802.3af-compliant Power over Ethernet (PoE)
Built-in Web Server
Modbus/TCP Protocol
Communication Security
2-way Isolation/ESD Protection
Built-in Dual Watchdog
10/100 Base-TX Ethernet
I/O Pair Connection
DO Type: 8 Isolation Open Collector (Source Type)
DI Type: 8 Isolation Wet Contact (Sink/Source)

Power over Ethernet Controller

Order Information

Please contact your IPC2U representative or sales@ipc2U.de for further information.

PET-7060

Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.

The PET-7060 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable). The PET-7060 can receive power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used in a standard Ethernet (non-PoE) system.

The PET-7060, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7060 offers easily and safely access for users from anytime and anywhere! In addition, the PET-7060 also supports Modbus/TCP protocol that makes perfect integration for PET-7060 to SCADA software.

The PET-7060provides 6 power relay (form A) output and 6 isolated wet contact (sink, source type) digital input channels. Each power relay supports contact rating as 5A@250VAC or 5A@30VDC and each digital input channel supports counter input (32 bits and 500Hz max.).

PET-7060 Controller

PET-7060 Controller

Abb.: PET 7060

PET-7060
6-channel Power Relay Output and 6-channel Isolation Digital Input with PoE

IEEE 802.3af-compliant Power over Ethernet (PoE)
Built-in Web Server
Modbus/TCP Protocol
Communication Security
2-way Isolation/ESD Protection
Built-in Dual Watchdog
10/100 Base-TX Ethernet
I/O Pair Connection
DO Type: 6 Power Relay (Form A)
DI Type: 6 Wet Contact (Sink/Source)

Power over Ethernet Controller

Order Information

Please contact your IPC2U representative or sales@ipc2U.de for further information.

PET-7065

Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.

The PET-7065 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable).

The PET-7065 can receive power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used in a standard Ethernet (non-PoE) system.

The PET-7065, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7065 offers easily and safely access for users from anytime and anywhere! In addition, the PET-7065 also supports Modbus/TCP protocol that makes perfect integration for PET-7065 to SCADA software.

The PET-7065 provides 6 Photo-MOS Relay(Form A) output and 6 isolated wet contact (sink, source type) digital input channels. Each Photo-MOS relay supports contact rating as 1A@60VAC or 1A@60VDC and each digital input channel supports counter input (32 bits and 500Hz max.).

PET-7065 Controller

Abb.: PET 7065

PET-7065
6-channel Photo-Mos Relay Output and 6-channel Isolated Digital Input Module with PoE

IEEE 802.3af-compliant Power over Ethernet (PoE)
Built-in Web Server
Modbus/TCP Protocol
Communication Security
2-way Isolation/ESD Protection
Built-in Dual Watchdog
10/100 Base-TX Ethernet
I/O Pair Connection
DO Type: 6 PhotoMOS Relay (Form A)
DI Type: 6 Wet Contact (Sink/Source)

Power over Ethernet Controller

Order Information

Please contact your IPC2U representative or sales@ipc2U.de for further information.

PET-7067

Power-over-Ethernet (PoE) allows power and data to be carried over a single Ethernet cable, so a device can operate solely from the power it receives through the data cable. This innovation allows greater flexibility in office design, higher efficiency in systems design, and faster turnaround time in set-up and implementation.

The PET-7067 feature true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using both Ethernet pairs (Category 5 Ethernet cable). The PET-7067 can receive power from an auxiliary power sources like AC adapters and battery in addition to the PoE enabled network. This is a desirable feature when the total system power requirements exceed the PSE's load capacity. Furthermore, with the auxiliary power option, the PET-7060 can be used in a standard Ethernet (non-PoE) system.

The PET-7067, a web-based PoE Ethernet I/O module, features a built-in web server, which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Besides, with the web HMI function, no more programming or HTML skills are needed; creating dynamic and attractive web pages for I/O monitoring and I/O control would be fun to engineers ever after. The PET-7067 offers easily and safely access for users from anytime and anywhere! In addition, the PET-7067 also supports Modbus/TCP protocol that makes perfect integration for PET-7067 to SCADA software.

The PET-7067 provides 8 power relay (form A) output channels. Each power relay supports contact rating as 5 A @ 250 VAC or 5 A @ 30 VDC.

PET-7065 Controller